Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench (for gas models)
- Tape measure
- Voltage tester
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, away from combustible materials and with adequate clearance from cabinets.
- Remove Packaging Materials: Remove all shipping materials, protective films, and tape from the stove surface and controls.
- Gas Connection (Gas Models): Connect gas supply line using approved flexible connector. Apply pipe thread sealant and check for leaks with soap solution.
- Electrical Connection (Electric Models): Connect to appropriate 240V circuit with proper grounding. Follow local electrical codes.
- Anti-Tip Bracket Installation: Install anti-tip bracket to wall or floor as specified to prevent tipping hazard.
- Level the Stove: Adjust leveling legs to ensure the stove is level from front to back and side to side.
- Final Checks: Verify all connections are secure, ensure proper ventilation, and test all burners and oven functions.
Specifications
| Model Series | NX58H9500WS |
| Type | Slide-In Gas Range |
| Color | Stainless Steel / Black Stainless |
| Burner Configuration | 5 Burners (including dual burner) |
| BTU Output | 18,000 BTU (Power Burner) |
| Oven Capacity | 5.8 cu. ft. |
| Control Type | Touch Controls with LED Display |
| Self-Cleaning | Yes (Pyrolytic) |
| Convection Oven | Yes (Triple Convection) |
| Power Requirements | 120V, 60Hz (Gas) / 240V, 60Hz (Electric) |
| Dimensions (HxWxD) | 36.25 x 29.88 x 28.75 inches |
| Weight | 145 lbs |
Warranty Information
- Full Warranty: 1 year parts and labor
- Extended Warranty: 5 years on oven cavity and burner grates
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-SAMSUNG or visit Samsung.com
Key Features
Virtual Flame Technology
Samsung's innovative Virtual Flame technology provides precise flame control with visual indicators, allowing for accurate temperature settings and consistent cooking results.
Triple Convection System
The advanced triple convection system uses three heating elements and a fan to circulate heat evenly throughout the oven, eliminating hot spots and ensuring perfect baking results.
Power Burner
18,000 BTU power burner delivers intense heat for rapid boiling, searing, and stir-frying, while maintaining precise temperature control for delicate tasks.
Wi-Fi Connectivity
SmartThings enabled for remote control via smartphone app, allowing you to preheat, monitor cooking progress, and receive completion alerts from anywhere.
FlexDuo™ Technology
Dual oven capability allows you to cook at two different temperatures simultaneously, with a divider that splits the oven into separate cooking zones.
Self-Cleaning Oven
Pyrolytic self-cleaning function heats the oven to extremely high temperatures to burn off food residue, leaving only a small amount of ash to wipe away.
Cooking Modes Explained
Convection Bake
Even heat distribution for perfect baking and roasting results
Convection Roast
Combination of convection and broiling for crispy exteriors
Proof
Low temperature setting ideal for proofing bread dough
Warm
Keeps cooked food at serving temperature without drying out
Broil
High heat from above for browning and caramelizing
Dehydrate
Low temperature setting for drying fruits and making jerky
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't ignite | Gas supply issue, clogged burner ports, faulty igniter | Check gas supply, clean burner ports, ensure igniter is sparking |
| Uneven cooking | Improper rack placement, oven not level, faulty heating element | Use recommended rack positions, level the stove, check heating elements |
| Oven not heating | Power issue, faulty thermostat, broken heating element | Check power supply, verify thermostat setting, inspect heating elements |
| Gas odor | Gas leak, improper combustion, food spillage | Check for leaks, ensure proper ventilation, clean burners |
| Error codes displayed | Sensor failure, electrical issue, control board problem | Refer to error code chart, reset power, contact service if persistent |
| Self-clean not working | Door not locked properly, faulty lock mechanism, control issue | Ensure door is fully closed and locked, check lock mechanism |
Error Codes
- F1: Oven temperature sensor failure - Contact service center
- F2: Oven over-temperature - Allow to cool, check ventilation
- F3: Oven door lock failure - Check door alignment and lock mechanism
- F4: Control board communication error - Reset power, contact service
- F5: Gas ignition failure - Check gas supply and igniter
- F7: Convection fan motor failure - Contact service center
Manual Downloads
Current Model Manuals
NX58H9500WS
5.8 cu. ft. Slide-In Gas Range
NX60A6711SS
6.0 cu. ft. Freestanding Electric Range
NX58K7850SG
5.8 cu. ft. Smart Gas Range
NE59N6630SS
5.9 cu. ft. Electric Range with Air Fry
Popular Previous Models
NX58H5600SS
5.8 cu. ft. Gas Range
NE59J7850WS
5.9 cu. ft. Electric Range
NX58F5700WS
5.8 cu. ft. Flex Duo Gas Range
NE63A6711SS
6.3 cu. ft. Electric Range