Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Gas leak detector solution
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, away from combustible materials and with access to gas and electrical connections.
- Remove Packaging Materials: Remove all shipping materials, protective films, and tape from the range oven.
- Gas Connection: Connect to a 1/2" NPT gas supply line using an approved flexible gas connector. Apply pipe thread sealant to all connections.
- Check for Gas Leaks: Apply leak detector solution to all gas connections. Bubbles indicate a leak - tighten connections and retest.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Anti-Tip Bracket Installation: Install and secure the anti-tip bracket to the floor or wall as specified in the installation instructions.
- Level the Range: Adjust the leveling legs to ensure the range is level from front to back and side to side.
- Test Operation: Test all burners and oven functions to ensure proper operation before regular use.
Specifications
| Model Series | NX58H9500WS |
| Type | Freestanding Gas Range with Convection Oven |
| Color | Stainless Steel / Black |
| Cooktop Burners | 5 Sealed Burners |
| Burner Output | 18,000 BTU (Power Burner), 5,000 BTU (Simmer Burner) |
| Oven Capacity | 5.8 cu. ft. |
| Control Type | Touch Controls with LED Display |
| Oven Type | True Convection with Fan |
| Self-Cleaning | Pyrolytic Self-Cleaning |
| Gas Type | Natural Gas or LP (Convertible) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 90 x 76 x 61 cm |
| Weight | 75 kg |
Warranty Information
- Full Warranty: 1 year parts and labor
- Burner Warranty: 5 years on sealed burners
- Oven Warranty: 2 years on oven cavity
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com
Key Features
Power Burner
18,000 BTU power burner provides intense heat for rapid boiling and high-temperature cooking, perfect for stir-frying and searing.
True Convection Oven
Third heating element and fan circulate hot air evenly throughout the oven cavity, ensuring consistent temperatures and faster cooking times.
Flame™ Adjustment
Precise flame control technology allows for perfect simmering with a stable low flame as low as 400 BTU for delicate sauces and melting.
Wi-Fi Connectivity
SmartThings enabled for remote control via smartphone app, allowing you to monitor cooking, preheat remotely, and receive alerts.
Pyrolytic Self-Cleaning
High-temperature self-cleaning cycle reduces baked-on grease and food residue to ash, making oven cleaning effortless.
FlexDuo™ Technology
Dual oven capability allows you to cook at two different temperatures simultaneously using the divider, or remove it for full oven capacity.
Cooking Modes Explained
Convection Bake
Even baking with circulated hot air for perfect pastries and baked goods
Convection Roast
High heat with convection for crispy exteriors and juicy interiors on meats
Broil
Direct top heat for browning, melting, and finishing dishes
Warm
Low temperature setting to keep food warm without overcooking
Proof
Precise low temperature for proofing bread dough
Dehydrate
Low temperature with convection for drying fruits, herbs, and jerky
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't light | Gas supply off, clogged burner ports, faulty igniter | Check gas supply, clean burner ports, ensure igniter clicks |
| Uneven flame | Clogged burner ports, improper air mixture | Clean burner thoroughly, adjust air shutter if accessible |
| Oven not heating | Power issue, faulty igniter, gas valve problem | Check power supply, listen for igniter clicking, verify gas supply |
| Gas smell | Gas leak, improper connection | Immediately turn off gas, ventilate area, check connections with leak detector |
| Oven temperature inaccurate | Faulty thermostat, calibration needed | Use oven thermometer to verify temperature, recalibrate if needed |
| Self-clean not working | Door not locked, faulty lock mechanism | Ensure door is completely closed and locked, check lock mechanism |
Error Codes
- F1: Oven temperature sensor failure - Contact service
- F2: Oven over temperature - Allow to cool, check ventilation
- F3: Oven igniter failure - Contact service
- F4: Oven gas valve failure - Contact service
- F5: Cooktop igniter failure - Check burner igniters
- F7: Door lock failure during self-clean - Check lock mechanism
- F9: Control board communication error - Power cycle, contact service if persists
Manual Downloads
Current Model Manuals
NX58H9500WS
5.8 cu. ft. Gas Range with Convection
NX58H5600SS
5.8 cu. ft. Smart Gas Range
NX58H9500RG
5.8 cu. ft. Gas Range in Black Stainless
NX58H9500BK
5.8 cu. ft. Gas Range in Black
Popular Previous Models
NX58F5700WS
5.8 cu. ft. Gas Range
NX58H9500BS
5.8 cu. ft. Dual Fuel Range
NX58K9500SG
5.8 cu. ft. Slide-In Gas Range
NX58H9500SL
5.8 cu. ft. Gas Range with Air Fry