Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Gas leak detector solution
- Tape measure
- Pipe thread sealant
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, away from combustible materials and with access to gas and electrical connections.
- Remove Packaging Materials: Remove all shipping materials, protective films, and tape from the gas range.
- Gas Connection: Connect the gas supply line to the range's gas inlet using an approved flexible gas connector. Apply pipe thread sealant to all connections.
- Check for Leaks: Use a gas leak detector solution to check all connections for leaks. Do not use open flame to test for leaks.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC outlet. Ensure the outlet is accessible after installation.
- Level the Range: Adjust the leveling legs to ensure the range is level from front to back and side to side.
- Test Operation: Test all burners and the oven to ensure proper ignition and flame adjustment.
Specifications
| Model Series | NX58H9500WS |
| Type | Freestanding Gas Range |
| Color | Stainless Steel / Black |
| Burner Configuration | 5 Burners (including 1 Power Burner) |
| Power Burner Output | 18,000 BTU |
| Oven Capacity | 5.8 cu. ft. |
| Control Type | Touch Controls with LED Display |
| Energy Source | Natural Gas or LP (convertible) |
| Gas Connection | 1/2" NPT |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 90 x 76 x 61 cm |
| Weight | 75 kg |
| Warranty | 1 Year Parts & Labor |
Warranty Information
- Full Warranty: 1 year parts and labor
- Burner Warranty: 5 years on burner components
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-SAMSUNG or visit Samsung.com
Key Features
Power Burner
18,000 BTU power burner provides intense heat for rapid boiling, searing, and stir-frying, reducing cooking time for high-heat tasks.
Flame™ Technology
Samsung's innovative flame adjustment technology provides precise heat control from a gentle simmer to full power, ensuring perfect cooking results.
Virtual Flame™
LED flame visualization helps you monitor burner status at a glance, even from across the kitchen, enhancing safety and convenience.
Quick Boil™
Special burner design and flame pattern technology brings water to a boil up to 25% faster than conventional burners, saving time and energy.
Smart Oven
Wi-Fi enabled oven with smartphone control allows remote monitoring, recipe downloads, and cooking program adjustments from your mobile device.
Triple Ring Burner
Three concentric flame rings provide even heat distribution across different pan sizes, from small saucepans to large stock pots.
Cooking Modes Explained
Convection Bake
Circulated hot air for even baking and roasting with reduced cooking times
Broil
High heat from above for perfect browning and caramelization
Proof
Low temperature setting ideal for yeast dough rising
Warm
Keeps cooked food at serving temperature without drying
Self Clean
High-temperature cycle that reduces spills to ash for easy cleaning
Delay Start
Program oven to start cooking at a later time for fresh meals when you need them
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't ignite | Gas supply off, clogged burner ports, faulty igniter | Check gas valve, clean burner ports, contact service if igniter faulty |
| Uneven flame | Clogged burner ports, improper air mixture | Clean burner thoroughly, adjust air shutter if accessible |
| Oven not heating | Gas supply issue, faulty safety valve, electronic control problem | Check gas supply, reset circuit breaker, contact service |
| Gas odor | Gas leak, improper burner adjustment | Immediately turn off gas, ventilate area, contact professional |
| Control panel not working | Power issue, locked controls, faulty electronics | Check power supply, unlock control panel, reset unit |
| Oven temperature inaccurate | Faulty thermostat, calibration needed | Use oven thermometer to verify, recalibrate if possible |
Error Codes
- F1: Oven temperature sensor failure - Contact service center
- F2: Oven over temperature - Allow to cool, check for obstructions
- F3: Oven door lock failure - Check door alignment and lock mechanism
- F4: Ignition failure - Check gas supply and igniter
- F5: Control panel communication error - Reset power to unit
- F6: Flame detection failure - Clean burner ports, check gas flow
Manual Downloads
Current Model Manuals
NX58H9500WS
5.8 cu. ft. Gas Range with Steam
NX58H5600SS
5.8 cu. ft. Smart Gas Range
NX58M9420SS
5.8 cu. ft. Slide-In Gas Range
NX58K7850SG
5.8 cu. ft. Gas Range with Air Fry
Popular Previous Models
NX58F5700WS
5.8 cu. ft. Gas Range
NX58H9500SS
5.8 cu. ft. Stainless Steel Range
NX58K7850WS
5.8 cu. ft. White Gas Range
NX58M9420WS
5.8 cu. ft. Slide-In White Range