Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Gas leak detector solution
- Tape measure
- Pipe thread sealant
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, away from flammable materials and with adequate clearance from overhead cabinets.
- Remove Packaging Materials: Remove all protective films, packaging materials, and shipping supports from the gas stove.
- Connect Gas Supply: Connect the gas supply line to the stove's gas inlet using an approved flexible gas connector. Apply pipe thread sealant to all connections.
- Check for Leaks: Apply leak detector solution to all gas connections. If bubbles appear, tighten connections and retest.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC outlet for ignition system and controls.
- Level the Stove: Adjust the leveling legs to ensure the stove is perfectly level from front to back and side to side.
- Test Operation: Test all burners and oven functions to ensure proper ignition and flame characteristics.
Specifications
| Model Series | NX58H9500WS |
| Type | Freestanding Gas Range |
| Color | Stainless Steel / Black |
| Burner Configuration | 5 Burners (including Power Burner) |
| Power Burner Output | 18,000 BTU |
| Oven Capacity | 5.8 cu. ft. |
| Control Type | Touch Controls with LED Display |
| Energy Source | Natural Gas or LP (convertible) |
| Ignition System | Electronic Spark Ignition |
| Dimensions (HxWxD) | 91.4 x 76.2 x 61 cm |
| Weight | 78 kg |
| Oven Temperature Range | 77°C - 288°C (170°F - 550°F) |
Warranty Information
- Full Warranty: 1 year parts and labor
- Burner Warranty: 5 years on burner assemblies
- Oven Warranty: 2 years on oven cavity
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com
Key Features
Power Burner
18,000 BTU power burner provides intense heat for rapid boiling, searing, and stir-frying, reducing cooking time for high-heat applications.
Flame™ Technology
Samsung's innovative flame adjustment technology provides precise control over burner output, allowing for delicate simmering to powerful boiling.
Virtual Flame™ Burners
Dual-ring burners create a virtual flame that distributes heat more evenly across the bottom of cookware, reducing hot spots and improving cooking results.
Smart Oven
The convection oven features multiple cooking modes including roast, bake, broil, and proof, with precise temperature control for perfect results.
SmartThings Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cooking progress, adjust temperatures, and receive completion alerts.
Easy-Clean Surface
The sealed burners and continuous grates make cleaning easy, while the porcelain drip pans are dishwasher safe for convenient maintenance.
Burner Configuration Explained
Power Burner
18,000 BTU output for rapid boiling and high-heat cooking
Dual-Ring Burner
9,000 BTU with virtual flame technology for even heating
Standard Burners
Two 5,000 BTU burners for everyday cooking tasks
Simmer Burner
Low 1,200 BTU output for delicate simmering and melting
Oven Burner
17,000 BTU for fast preheating and consistent baking
Broil Element
Upper heating element for browning and crisping
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't ignite | Gas supply off, clogged burner ports, faulty igniter | Check gas supply, clean burner ports, check igniter spark |
| Uneven flame | Clogged burner ports, improper air mixture | Clean burner ports, adjust air shutter if accessible |
| Yellow or orange flame | Improper air-to-gas ratio, dirty burner | Clean burner, ensure proper ventilation |
| Oven not heating | Gas supply issue, faulty igniter, control problem | Check gas supply, verify igniter operation, check controls |
| Gas odor | Gas leak, improper combustion | Immediately turn off gas, ventilate area, check for leaks |
| Control panel not working | Power issue, locked controls, faulty display | Check power supply, unlock controls, reset circuit breaker |
Error Codes
- F1: Oven temperature sensor issue - Check sensor connection
- F2: Oven over temperature - Allow to cool, check ventilation
- F3: Oven igniter failure - Check igniter operation
- F4: Gas supply issue - Check gas valve and supply
- F5: Control board communication error - Reset power
- F6: Surface burner issue - Check burner valves and igniters
Manual Downloads
Current Model Manuals
NX58H9500WS
5.8 cu. ft. Smart Gas Range
NX58H5600SS
5.8 cu. ft. Gas Range
NX58H9500WG
5.8 cu. ft. Smart Range Black
NX58K7850SG
5.8 cu. ft. Slide-In Range
Popular Previous Models
NX58F5700SS
5.8 cu. ft. Gas Range
NX58H5000SS
5.8 cu. ft. Freestanding Range
NX58K7750SG
5.8 cu. ft. Smart Slide-In
NX58H9500BS
5.8 cu. ft. Smart Range SS