Samsung MS23F301TAK User Manual

The Samsung MS23F301TAK is a 23-inch Full HD LED Monitor with a sleek design, VGA and HDMI inputs, built-in speakers, Eco Saving mode, Flicker-Free technology, and Eye Saver Mode. It features a 1920x1080 resolution, 60Hz refresh rate, 5ms response time, and wide viewing angles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 23-inch LED panel, Stand Base, Power Cable, VGA Cable, Quick Setup Guide.

Installation

Unpack and inspect contents. Place on stable, flat surface.

1. Attach Stand: Align stand neck with monitor back, press until it clicks.
2. Connect Video Source: Use VGA or HDMI cable to connect to PC or other device.
3. Connect Audio: If using external speakers, connect to audio-out jack.
4. Plug into AC power.

WARNING! Do not touch the screen with sharp objects. Ensure the monitor is placed on a stable surface to prevent tipping.

First-Time Setup

Power on monitor; follow on-screen prompts if any.

1. Select Input Source: Press SOURCE button to choose VGA or HDMI.
2. Adjust Screen Settings: Use OSD Menu to set brightness, contrast, etc.
3. Enable Eco Features: Access Eco Saving and Eye Saver Mode from OSD.
4. Install Drivers (Optional): For optimal performance, install monitor drivers from Samsung website.

CAUTION! Handle the monitor with care; avoid pressing on the LCD panel.

Specifications

• Model: MS23F301TAK
• Screen Size: 23 inches
• Resolution: 1920 x 1080 (Full HD)
• Aspect Ratio: 16:9
• Brightness: 250 cd/m²
• Contrast Ratio: 1000:1 (Static)
• Response Time: 5ms
• Refresh Rate: 60Hz
• Inputs: VGA, HDMI
• Speakers: 2W x 2
• Power Consumption: 18W (Typical), <0.3W (Standby)
• Power Source: 100-240V AC, 50/60Hz

Controls and Settings

Access OSD via Menu button on monitor. Front Controls: Power, Menu, Source, Down, Up.

OSD Menu Navigation: Use Up/Down to navigate, Menu to select, Source to change input.

Picture: Brightness, Contrast, Sharpness, Color, MagicBright (Custom, Standard, Movie, Game). Color: Color Tone (Cool, Normal, Warm), Custom Color. System: Language, Transparency, Reset, Information. Eco: Eco Saving (Off, Minimum, Medium, Maximum), Eye Saver Mode (On/Off).

Connecting Devices

VGA: Connect to PC using VGA cable. HDMI: Connect to PC, gaming console, or media player using HDMI cable.

1. Turn off monitor and device before connecting.
2. Connect video cable to corresponding port on monitor and device.
3. Connect audio cable if using external speakers (optional).
4. Select correct input source using Source button.

Tip: For best picture quality, use HDMI connection.

On-Screen Display (OSD)

Use OSD to adjust picture and system settings.

1. Press Menu button to open OSD.
2. Navigate using Up/Down buttons.
3. Press Menu to enter sub-menu or confirm selection.
4. Adjust settings as needed.
5. Exit by pressing Menu button repeatedly or wait for timeout.

Reset to Factory Defaults: OSD > System > Reset > Yes.

Eco Features

Eco Saving: Adjusts brightness to reduce power consumption. Eye Saver Mode: Reduces blue light for comfortable viewing. Flicker-Free: Minimizes screen flicker.

To enable: OSD > Eco > Eco Saving (select level) and Eye Saver Mode (On).

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth; for stubborn stains, dampen cloth with water. Do not use chemicals.

CAUTION! Do not spray liquids directly on screen. Avoid abrasive materials.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © Samsung Electronics Co., Ltd. For support, visit www.samsung.com or contact 1-800-SAMSUNG.

Troubleshooting

Reset: OSD > System > Reset.

Service: 1-800-SAMSUNG; www.samsung.com/support