Parts Catalog
Common Replacement Parts:
- Burner Grates
- Heating Elements
- Control Knobs
- Oven Door Hinges
- Thermal Fuses
- Ignition Switches
Parts Identification Guide
- Model Identification: Locate the model number on the rating plate usually found inside the oven door or on the back panel.
- Part Number Verification: Verify part numbers using the exploded view diagrams in this manual.
- Compatibility Check: Ensure parts are compatible with your specific Samsung range model.
- Safety Components: Identify safety-critical parts that require professional installation.
- Electrical Parts: Note electrical components that must match original specifications.
- Gas Components: For gas ranges, identify certified gas parts that meet safety standards.
- Ordering Reference: Use the part numbers provided for accurate ordering.
Specifications
| Model Series | NX58H9500WS, NE58F9500SS, NE63A6711SS |
| Type | Slide-in & Freestanding Ranges |
| Fuel Type | Gas, Electric, Dual Fuel |
| Burner Configuration | 4-6 Burners (Various BTU Ratings) |
| Oven Capacity | 5.0 - 6.3 cu.ft. |
| Control Type | Knob Controls / Touch Controls |
| Cooktop Material | Stainless Steel, Ceramic Glass |
| Power Requirements (Electric) | 240V, 50A |
| Gas Requirements | Natural Gas or LP (Convertible) |
| Dimensions (Standard) | 90 x 60 x 60 cm |
| Weight | 55 - 75 kg |
| Warranty Period | 1 Year Full Warranty |
Warranty Information
- Full Warranty: 1 year parts and labor
- Extended Coverage: Optional extended warranty available
- Professional Installation: Required for warranty validation
For warranty service, contact Samsung Customer Service at 1-800-SAMSUNG or visit Samsung.com/support
Installation Guide
Gas Connection
Proper gas line installation with approved connectors and leak testing procedures. Includes natural gas to LP conversion instructions.
Electrical Connection
240V electrical hookup requirements, grounding specifications, and circuit breaker recommendations for electric and dual fuel models.
Ventilation Requirements
Range hood specifications, clearance requirements, and ventilation guidelines for proper installation and safety.
Leveling and Alignment
Adjustment of leveling legs, countertop clearance, and proper alignment for slide-in range installations.
Anti-Tip Bracket
Installation of mandatory anti-tip bracket to prevent range tipping. Critical safety component for all installations.
Final Testing
Post-installation testing procedures including burner ignition, oven heating verification, and safety checks.
Installation Safety Checklist
Gas Leak Test
Required soap solution test on all gas connections before initial use
Electrical Grounding
Verify proper grounding of electrical supply and range chassis
Clearance Verification
Check minimum clearance from combustible materials
Anti-Tip Installation
Confirm anti-tip bracket is properly installed and engaged
Ventilation Check
Ensure adequate ventilation for gas combustion
Burner Operation
Test all burners for proper ignition and flame characteristics
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't ignite | Gas supply issue, clogged burner, faulty igniter | Check gas supply, clean burner ports, replace igniter |
| Uneven heating | Faulty heating element, temperature sensor issue | Test heating element resistance, calibrate or replace sensor |
| Oven not heating | Thermal fuse blown, faulty bake element | Check thermal fuse continuity, replace bake element |
| Gas odor | Gas leak, improper combustion | Perform leak test, check air shutter adjustment |
| Control panel unresponsive | Power issue, faulty control board | Check power supply, reset circuit breaker, replace control board |
| Door won't close properly | Misaligned hinges, worn door gasket | Adjust hinge alignment, replace door gasket |
Error Codes
- F1 / F2: Oven temperature sensor failure - Replace sensor
- F3 / F4: Oven over-temperature - Check ventilation, replace thermostat
- F7: Shorted key - Check control panel for moisture or damage
- F9: Communication error - Check wiring harness connections
- C0 / C1: Clock display error - Reset or replace control board
- LC: Locked control - Unlock control panel per manual
Parts Ordering
Common Replacement Parts
Burner Assembly
Complete burner with cap and base
Bake Element
2300W oven baking element
Igniter
Hot surface igniter for gas oven
Door Gasket
Oven door seal replacement
Electrical Components
Control Board
Main electronic control module
Temperature Sensor
Oven temperature probe
Thermal Fuse
Safety thermal cutoff
Selector Switch
Oven function selector