Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Tape measure
- Pipe wrench
- Gas leak detector solution
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, away from combustible materials and with adequate clearance from cabinets.
- Remove Packaging Materials: Remove all protective films, tapes, and packaging materials from the stove and burners.
- Gas Connection: Connect gas supply line using approved flexible connector. Apply pipe thread sealant to all connections.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Ensure dedicated circuit for electric ignition system.
- Anti-Tip Bracket Installation: Secure anti-tip bracket to floor or wall according to instructions to prevent tipping.
- Level the Stove: Adjust leveling legs to ensure the stove is level from front to back and side to side.
- Leak Test: Apply leak detector solution to all gas connections and check for bubbles indicating leaks.
- Test Operation: Test all burners and oven functions to ensure proper operation before regular use.
Specifications
| Model Series | NX58H9500WS |
| Type | Gas Range with Convection Oven |
| Color | Stainless Steel |
| Cooktop Burners | 5 Sealed Burners |
| Burner Output | 18,000 BTU (Power Burner) |
| Oven Capacity | 5.8 cu. ft. |
| Control Type | Touch Controls with LED Display |
| Energy Source | Natural Gas / LP Convertible |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 91.4 x 76.2 x 61 cm |
| Weight | 74.8 kg |
| Warranty | 1 Year Full Warranty |
Warranty Information
- Full Warranty: 1 year parts and labor
- Burner Warranty: 5 years on sealed burners
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-SAMSUNG or visit Samsung.com
Key Features
Power Burner
18,000 BTU power burner provides intense heat for rapid boiling, searing, and stir-frying, reducing cooking time for high-heat tasks.
Virtual Flame™ Technology
Advanced burner technology provides precise flame control with 15 different settings, from ultra-low simmer to maximum power.
True Convection Oven
Third heating element and fan circulate hot air evenly throughout the oven cavity, eliminating hot spots and ensuring consistent cooking results.
Wi-Fi Connectivity
SmartThings enabled for remote control via smartphone app, allowing you to monitor cooking progress, adjust temperatures, and receive alerts.
Self-Cleaning Oven
High-temperature self-cleaning cycle reduces baked-on spills to ash, making oven cleaning quick and effortless.
FlexDuo™ Technology
Divide the oven into two separate cooking zones with independent temperature controls, allowing you to cook multiple dishes simultaneously.
Cooking Modes Explained
Convection Bake
Even baking with circulating hot air for perfect pastries and baked goods
Convection Roast
Crispy exterior with juicy interior for meats and poultry
Proof
Low-temperature setting ideal for proofing bread dough
Warm
Keep cooked foods at serving temperature without drying out
Broil
High heat from top element for browning and caramelizing
Dehydrate
Low-temperature drying for fruits, vegetables, and herbs
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't ignite | Gas supply off, clogged burner ports, faulty igniter | Check gas valve, clean burner ports, ensure igniter clicks |
| Uneven flame | Clogged burner ports, improper air mixture | Clean burner thoroughly, adjust air shutter if accessible |
| Oven not heating | Power issue, faulty heating element, control board error | Check power supply, inspect heating elements, reset circuit breaker |
| Gas odor | Gas leak, improper combustion | Immediately turn off gas, ventilate area, check connections |
| Display not working | Power issue, control lock activated | Check power connection, press and hold control lock button |
| Self-clean not working | Door not locked, temperature sensor issue | Ensure door is fully closed and locked, check door latch mechanism |
Error Codes
- F1: Oven temperature sensor failure - Contact service center
- F2: Oven over-temperature - Allow to cool, check for obstructions
- F3: Oven communication error - Reset power to range
- F4: Ignition failure - Check gas supply and igniter
- F5: Door lock mechanism failure - Ensure door closes properly
- F7: Control board communication error - Reset circuit breaker
Manual Downloads
Current Model Manuals
NX58H9500WS
5.8 cu. ft. Gas Range
NX58H5600SS
5.8 cu. ft. Smart Range
NX58H9500SS
5.8 cu. ft. Stainless Steel
NX58H9500BK
5.8 cu. ft. Black Stainless
Popular Previous Models
NX58F5700WS
5.8 cu. ft. Freestanding
NX58H9500RG
5.8 cu. ft. Fingerprint Resistant
NX58K9500WG
5.8 cu. ft. Wi-Fi Enabled
NX58H9500SL
5.8 cu. ft. Slide-In